Office/Parts 877-355-5438 | Fax 920-668-8434 | Tech Support 262-613-0889

equipmentsales@skytrak.com  |  parts@skytrak.com  |  techsupport@skytrak.com

Click the Chart to Enlarge Click the Chart to Enlarge

SkyTrak(R) Model 10042L

10042L SPECIFICATIONS

DIMENSIONS
Length (less forks): 225.2 in. (5.72 m)

Width: 102 in. (2.59 m)

Height: 100.1 in. (2.54 m)

Wheelbase: 119.5 in. (3.03 m)

Ground Clearance: 18 in. (457 mm)

Outside Turning Radius: 164 in. (4.16 m)

Max. Reach from Front Tires to 24 in. (609 mm) Load Center: 26.5 ft (8.07 m)

PERFORMANCE
Rated Capacity: 10,000 lb (4,536 kg)

Maximum Lift Height: 42 ft 1 in. (12.8 m)

Frame Leveling: 10˚

Lift Speed (boom retracted)
Up: 15 sec
Down: 12.5 sec

Boom Speed
Extend: 14.5 sec
Retract: 14 sec

Travel Speed Forward
4-Speed: 20 mph (32 kmph)

Drawbar Pull: 24,000 lb (10,886 kg)

Operating Weight Without Carriage and Forks: 26,883 lb (12,193 kg)

STANDARD SPECIFICATIONS
Engine: Make and Model  Cummins QSB4.5T Turbo

Fuel: Diesel

Cycles: 4

No. of Cylinders: 4

Displacement: 274 cu in (4.5 L)

Torque Rating: 305 lb ft (414 Nm) @ 1,500 rpm

Rated Speed: 2,500 rpm

Max. Gross BHP: 110 hp (82 kW)

Fuel Tank: 35 gal (132 L)

ENGINE FILTERS
Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector
and replaceable dry filter element. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.

ELECTRICAL SYSTEM
Voltage: 12V
Alternator: 95 amp
Battery: Two batteries, each with 850 cold cranking amps at 0°F

TRANSMISSION
Modulated powershift. 4-speed forward and 3-speed reverse.

AXLES
Full-time planetary 4-wheel drive.
Oscillating rear axle with Stabil-TRAK™ System.

SERVICE BRAKES
Hydraulically actuated inboard wet disc brakes.

PARKING BRAKES
Emergency brake with transmission declutch feature.

TIRES
Standard: Air Filled 17.5 x 25, 12 ply
Optional: 17.5 x 25 radial
17.5 x 25 bias ply foam-filled

CAB
Certified ROPS/FOPS structure. Deluxe suspension seat with retractable seat belt. Rear view mirrors. Lockable covers.

STEERING
4-Wheel Power steering. Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.

INSTRUMENTS
Instrument cluster with gauges and warning lights.

CONTROLS
Dual joystick controls. Proportional frame tilt, fork tilt and auxiliary hydraulics.

HYDRAULIC SYSTEM
• Implement Piston pump.
• 60 gal (225 L) system capacity.
• Variable flow, load sensitive hydraulic system.
• Load holding valves on frame level, stabilizer, attachment tilt, extend and lift cylinders.

FRONT OUTRIGGERS
Axle mounted high clearance outriggers allow frame leveling without changing stance.

AUXILIARY HYDRAULICS
Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls and hydraulic lines.

ACCESSORIES & OPTIONS
• Enclosed All Weather Cab
• Basic Work Lights
• Complete Road Lights
• Rotating Beacon
• Fenders

ATTACHMENTS
Standard Carriage
48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)

± 10° Side Tilt Carriage
48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)

± 45° Swing Carriage
52 in. (1.3 m) or 72 in. (1.8 m)

Pallet Forks
2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)

Lumber Forks
1.75 x 7 x 60 in. (44 mm x 178 mm x 1.5 m)

Block Forks
2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)

Wallboard/Sheet Material Handler

Utility Bucket
1.25 cu yd (0.95 m3)

Concrete Bucket
0.5 cu yd (0.38 m3) or 1.00 cu yd (0.76 m3)

Truss Boom
15 ft (4.57 m)

Truss Boom with Winch
3 ft (91 cm)

Hydraulic Earth Auger