sales@skytrak.com  |  parts@skytrak.com

Click to the Chart to Enlarge

SkyTrak(R) Model 5030

5030 SPECIFICATIONS

DIMENSIONS
Lifting Height: 30’6” (9.3 m)
Overall Length (less forks): 16’5” (5 m)
Width: 95-3/8 in. (2.4 m)
Wheelbase: 96 in. (2.4 m)
Ground Clearance: 13 in. (330 mm)
Outside Turning Radius: 17’ (5 m)
Fork Length (flat): 36 in. (914 mm)
Block Forks: 48 in. (1219 mm)

ENGINE
Ford 4-cycle, 70 hp 268 CID (4195 cc); diesel fuel.

TORQUE CONVERTER
11 in. (279 mm) single stage. Foot operated shuttle pedal.

HYDRAULIC SYSTEM
Lifting-front mounted, gear-type pump, 37 gpm (140l) @2,200 rpm.

FRONT WHEEL ASSIST
Piston type, pressure compensating pump, 17 gpm (64 l) @2,200 rpm. Independent front wheel hydraulic motors assist at speeds below 5 mph (8 km/h). automatic engagement and disengagement.

REAR AXLE
Hydrostatically steered. Can oscillate + or - 10˚ to accommodate rough terrain.

BRAKES
8 in. (203 mm) oil-cooled disc-type. Individual brakes may be operated separately or locked together. Parking brake locks and releases service brakes. Hand emergency brake lever automatically disengages when released.

ELECTRICAL SYSTEM
12 volt system, negative ground, with starting motor, alternator and two batteries.

MAXIMUM TRAVEL SPEED
@2,100 rpm (converter output speed)

Forward:
1st gear: 2.9 mph (4.7 km/h)
2nd gear: 4.6 mph (7.4 km/h)
3rd gear: 13.4 mph (8.3 km/h)
4th gear: 18.8 mph (30.3 km/h)

Reverse:
1st gear: 2.8 mph (4.5 km/h)
2nd gear: 4.6 mph (7.4 km/h)
3rd gear: 8.3 mph (13.4 km/h)
4th gear: 18.6 mph (29.9 km/h)

DIFFERENTIAL LOCK
Locks rear drive wheels for positive traction in mud, ice or loose ground. Automatically disengages when no longer required.

FRONT AXLE STABILIZER
With boom retracted, stabilizer cushions front wheel shocks when traveling over rough terrain. Automatically locks when boom is extended, preventing front axle from pivoting. Provides four point stance.

OPERATING SPECS
Height (boom lowered): 9’6” (2.9 m)
Weight (approx.): 17,600 lbs. (7983 kg)
Fuel tank capacity: 20 gal. (76 liters)
Hydraulic reservoir capacity: 32 gal. (121 liters)

STANDARD TIRES
Front: 15 x 19.5, 12-ply tubeless
Rear: 16.9 x 24, 8-ply all-traction utility tube-type

STANDARD EQUIPMENT
• Ammeter
• Indicators for engine oil pressure, engine temperature, hydraulic oil temperature
• FOPS
• Horn
• Back-up alarm
• Brake lights
• Seat belts
• Parking brake

ATTACHMENTS
Forks
36”(914 mm), set of two, 5,000 lb. (2,268 kg) @18” (457 mm) centers
48” (1219 mm), set of two, 5,000 lb. (2,268 kg) @24” (610 mm) centers

Rear Wheel Weights (in lieu of hydrofill)

Standard Carriage
48 in. (1219 mm), 60 in. (1524 mm) or 72 in. (1829 mm)

Block Forks
48 in. (1219 mm), set of four, 4,000 lb (1814 kg) @ 24” (610 mm) centers
48 in. (1219 mm), set of six, 6,000 lb (2722 kg) @ 24” (610 mm) centers

Concrete Hopper
3/4 cu. yd. (.57 m3)

Rubbish Bucket
1 cu. yd. (.77 m3)

Crane Hook

Light Package

Vandalism Kit

Mast Extension
10 ft. (3.1)

Special Paint (single color)

Fenders
Front (set of two); Rear (set of two)

Side Tilt Carriage
48 in. (1219 mm), 60 in. (1524 mm) or 72 in. (1829 mm)

Cold Start Kit

Safety Check Valves (for Lift and Tilt Cylinders)