Click to the Chart to Enlarge
Load ratings are in
compliance with ANSI B56.6 STABILITY for rough terrain forklifts. Cab tested
to ANSI B56.6 FOPS specifications.
Front wheels: 15 x 19.5, 14 ply transport.
Rear wheels: 16.9 x 28, 10 ply, all-traction utility tube-type.
Engine: Ford 4-cylinder diesel rated @ 76.9 net hp (52.2 kW) @2 2100 rpm;
268 CID (4392 cm3).
Fuel Tank Capacity: 20 gal. (75.7 litres)
Cooling System Capacity: 20 qts. (21.2 litres)
Torque Converter: 11 in. (279 mm) single stage. Foot operated shuttle pedal.
Hydraulic System: Lifting
Front-mounted gear-type pump, 37 gpm. (1401/mm) @ 2100 rpm.
Hydraulic Reservoir Capacity: 32 gal. (121.1 litres)
WEIGHT & DIMENSIONS
Capacity: 6,000 lbs.(2722 kg)
Maximum Lifting Height: 34' 2" (10.4 m)
Maximum Length Less Forks: 18' 0" (5.5 m)
Maximum Height: 9' 8" (3.0 m)
Maximum Forward Reach: 18' 0" (5.5 m)
Maximum Reach, Below Grade: 4' 0" (1.3 m)
Width: 7' 11.375" (2.4 m)
Operating Weight: Approximately 18,600 lbs. (8437 kg)
Wheelbase: 111" (2819 mm)
Ground Clearance: 13" (330 mm)
Turning Clearance Radius: 20' 6" (6.2 m)
Fork Lengths: 48" (1219 mm)
Instrument Panel: Conveniently located and easily identified by SAE markings
time-tested and proven Koehring shooting boom principle with capability to
place loads up, out, over and down.
Positive traction, even in slippery conditions, provided by rear axle
Four-point stability is assured with front axle oscillation lock thats
set automatically when boom is extended for load placement.
The ultimate in operator convenience with its foot-operated travel pedal
and control levers that move in same direction as boom and carriage.
Prices starting at $19,000.
OTHER STANDARD FEATURES
12V Electrical System Including Starting Motor
Alternator and Two Batteries
Engine Oil Pressure
Engine Temperature and Hydraulic Oil Temperature Indicators
10-ft. (3 m) Mast Extension
48" (1219 mm), and 60" (1524 mm)
Conventional or Side-Tilt Carriages
Shaft Mount Carriages, 4000 lb. (1814 kg) Block Forks, Set of Four
6000 lb. (2722 kg) Block Forks, Set of Six Counterbalance Valves Lift
Cold Start Kit
Front and Rear Fenders
Rear Wheel Weights
FRONT WHEEL ASSIST
pressure compensating pump, 17 gpm (64.4 1/mm) @ 2100 rpm. Independent front
wheel hydraulic motors assist at speeds below 5 mph (8.0 km/h). Automatic
engagement and disengagement.
8 in. (203 mm)
oil-cooled disc-type. Individual brakes may be operated separately or locked
together. Parking brake locks and releases service brakes. Hand emergency
brake lever automatically disengages when released.
4 speeds both
forward and reverse. 0-20 mph (0-32 km/h) 2100 rpm (converter output speed).
Locks rear drive
wheels for positive traction in mud, on ice or loose ground. Automatically
disengages when releasing foot pedal pressure.
FRONT AXLE STABILIZER
retracted, stabilizer cushions front wheel shocks when traveling over rough
terrain. Automatically locks when boom is extended, preventing front axle
from pivoting. Provides four-point stance.
2-section boom. Maximum forward reach of 18'0" (5.5 m) Maximum below-grade
reach of 4' 3" (1.3 in).
Standard forks are 48" (1219 mm) long and 4" (102 mm) wide. Fork tilt in
carry position is 20° forward and 10° backward.
Optional attachments can be easily adapted to boom end, including
Crane hook, concrete hopper, mortar tub and rubbish bucket available.
with rear-center positioning for best view of forks and surrounding jobsite
area. Easy access to two-way adjustable operator's seat. Equipped with seat
Three levers to
control boom angle, boom length and fork tilt. Foot-operated travel pedal.
Brake lock for parking. Steering wheel and horn. Reverse alarm. Key-operated
engine power switch. Fuel shut-off.