JLG 1044C54 Features And Specs
JLG 1044C54 Features
The JLG 1044C54 telehandler combines high performance with compact size for job sites demanding power and agility. With a max lift capacity of 5,500 lb and a reach just under 11 ft, it fits tight spaces without sacrificing load control. Powered by a 74 hp Deutz engine and hydrostatic transmission, the G5-18A delivers steady travel speeds, smooth telescoping action and quick response for fast-paced tasks.
JLG 1044C54 Specs
| Rated Capacity | 10,000 lb (4,536 kg) |
| Maximum Lift Height | 54 ft (16.5 m) |
| Frame Leveling | 10 degrees |
| Lift Speed (boom retracted, no load) | Up: 15.6 sec Down: 14.6 sec |
| Boom Speed (no load) | Extend: 15.2 sec Retract: 11.3 sec |
| Travel Speed Forward | 22 mph (35 kmph) max. |
| Drawbar Pull (loaded) | 21,700 lb (9,843 kg) |
| Operating Weight With 50 in. Carriage and Forks | 32,697 lb (14,931 kg) |
| Forward Reach | 45 ft (13.7 m) |
| Horizontal Load Placement | 80 in. (2.0 m) |
| Length (less forks) | 246 in. (6.24 m) |
| Width | 101 in. (2.57 m) |
| Height | 97 in. (2.46 m) |
| Wheelbase | 124 in. (3.14 m) |
| Tire Size | 10.0/75-15.3 Pneumatic Ag Tread |
| Wheelbase | 5 ft 9 in. (1.75 m) |
| Ground Clearance | 16 in. (406 mm) |
| Outside Turning Radius | 170 in. (4.32 m) |
| Maximum Reach | from Front Tires to 24 in. (609 mm) Load Center 45 ft (13.7 m) |
STANDARD EQUIPMENT, OPTIONS & ATTACHMENTS FOR THE JLG 1044C54
Engine
- Make and Model John Deere 4045TF
- Fuel No. 2 Diesel
- Cycles 4
- No. of Cylinders 4
- Displacement 276 cu in (4.5 L)
- Rated Speed 2,500 rpm
- Max. Gross BHP 115 hp (85 kW)
- Fuel Tank 36 gal (136 L)
- Engine Block Heater
Engine Filters
- Two-stage dry air cleaner—centrifugal
- pre-cleaner with continuous dust ejector
- plus replaceable primary dry filter element and safety element.
- Visual service indicator.
- Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
Electrical System
- Voltage: 12V
- Alternator: 95 amp
- Battery: 925 cold cranking amps at 0°F
Transmission
- Modulated powershift.
- 4-speed forward and 3-speed reverse.
Axles
- Full-time planetary 4-wheel drive.
- Oscillating rear axle.
Service Brakes
- Hydraulically actuated inboard wet disc brakes.
Parking Brakes
- Spring applied hydraulic release brake with transmission declutch feature.
Tires
- Standard: 400/75-28
Cab
- Certified ROPS/FOPS structure.
- Suspension seat
- Steering wheel mounted horn.
- Rear view mirrors.
Steering
- 4-wheel circle, 4-wheel crab, 2-wheel front.
Instruments
- Hydraulic oil temperature, fuel level, tachometer,
and hourmeter gauges. - Warning indicators for transmission
oil temperature, hydraulic oil temperature, engine
oil pressure, alternator charging,
air filter restriction, hydraulic oil filter
restriction, and low brake pressure.
Indicators for parking brake and
RAS System.
Controls
- Multi-function, fully proportional pilot operated
joystick controls for boom functions, carriage tilt,
auxiliary control, frame leveling, and horizontal
load placement system.
Hydraulic System
- Load sensing dual gear pumps.
- 33.5 gal (127 L) system capacity.
- Front Outriggers
- Axle mounted high clearance outriggers allow
frame leveling without changing stance.
Auxiliary Hydraulics
- Used for all attachments equipped with cylinders
or other hydraulic components. Consists of valves,
controls and hydraulic lines.
- Enclosed All Weather Cab
- Work Lights
- Road Lights
- Rotating Beacon
- Tire Options
- Foam-filled
- Rock Lug
- Second Auxiliary Hydraulic Line
- Air Conditioning
- Extra Battery
Standard Carriage
50 in. (1.3 m) or 74 in. (1.9 m)
± 10° Side Tilt Carriage
50 in. (1.3 m) or 74 in. (1.9 m)
± 45° Swing Carriage
72 in. (1.8 m)
Pallet Forks
2 x 5 x 48 in.
(51 mm x 127 mm x 1.2 m) or
2 x 5 x 60 in.
(51 mm x 127 mm x 1.5 m)
Lumber Forks
1.75 x 7 x 60 in.
(45 mm x 178 mm x 1.5 m)
Block Forks
2 x 2 x 48 in.
(51 mm x 51 mm x 1.2 m)
Truss Boom With or Without Winch
10 ft (3.0 m)
8 ft (2.4 m) Tower
Light Material Bucket
1.25 cu yd (0.95 m3) capacity
96 in. (2.4 m) wide
Hydraulic Fork Position Carriage
50 in. (1.3 m)
Single and dual fork options
Lifting Hook
Fork Mounted Work Platform
Interested in buying the JLG 1044C54? Contact MJ Equipment today!