JLG 644E42 Features And Specs
JLG 644E42 Features
The JLG 644E42 telehandler combines high performance with durability for job sites demanding power and agility.
JLG 644E42 Specs
| Rated Capacity | 6,000 lb (2,722 kg) |
| Maximum Lift Height | 42 ft (12.8 m) |
| Frame Leveling | 12 degrees |
| Lift Speed (boom retracted) | Up 12.5 sec Down 11.5 sec |
| Boom Speed (no load) | Extend 12.5 sec Retract 13.5 sec |
| Travel Speed Forward | 20 mph (32 kmph) max. |
| Drawbar Pull (loaded) | 18,600 lb (8,437 kg) |
| Operating Weight With 50 in. Carriage and Forks | 24,467 lb (11,098 kg) |
| Forward Reach | 35 ft 6 in. (10.8 m) |
| Horizontal Load Placement | 80 in. (2.0 m) |
| Length (less forks) | 253 in. (6.43 m) |
| Width | 98 in. (2.48 m) |
| Height | 95.5 in. (2.43 m) |
| Wheelbase | 131 in. (3.32 m) |
| Ground Clearance | 16 in. (406 mm) |
| Outside Turning Radius | 148 in. (3.75 m) |
| Max. Reach from Front Tires to 24 in. (609 mm) Load Center | 35.5 ft/29 ft (10.82 m/8.83 m) |
STANDARD EQUIPMENT, OPTIONS & ATTACHMENTS FOR THE JLG 644E42
Engine
- Make and Model Cummins B4.5T Turbo
- Fuel Diesel
- Cycles 4
- No. of Cylinders 4
- Displacement 276 cu in (4.5 L)
- Torque Rating 305 lb ft (414 Nm) @ 1,500 rpm
- Rated Speed 2,500 rpm
- Max. Gross BHP 99 hp (74 kW)
- Fuel Tank 46 gal (174 L)
- Engine Filters
- Two-stage centrifugal air cleaner.
- Serviceable fuel filter/water separator.
- Full-flow replaceable-element engine oil filter.
Electrical System
- Voltage: 12V
- Alternator: 65 amp
- Battery: 850 cold cranking amps at 0°F
Transmission
- Modulated powershift with integral full gear-drive dropbox.
- 4-speed forward and 3-speed reverse.
Axles
- Full-time planetary 4-wheel drive.
- Limited slip front differential.
- Stabil-Trak rear axle stability system.
Service Brakes
- Inboard mounted internal wet disc brakes.
Parking Brakes
- Spring applied, hydraulically released parking brake
- with transmission declutch feature.
Tires
- Standard: 370/75-28.
- Fenders
Cab
- Certified ROPS/FOPS structure.
- Steering wheel mounted horn and back-up alarm.
- Rear view mirrors.
Steering
- 4-wheel circle, 4-wheel crab, 2-wheel front.
Instruments
- Hydraulic oil temperature, fuel level, tachometer, and hourmeter gauges.
- Warning indicators for transmission oil temperature, hydraulic oil temperature, engine oil pressure, alternator charging, air filter restriction, hydraulic oil filter restriction, and low brake pressure.
- Indicators for parking brake, and Stabil-Trak System.
Controls
- Multi-function, fully proportional pilot operated joystick controls for boom functions, carriage tilt, auxiliary control, frame leveling, and horizontal load placement system.
Hydraulic System
- Load sensing dual gear pump.
- 50.2 gal (190 L) system capacity.
Auxiliary Hydraulics
- Used for all attachments equipped with cylinders or other hydraulic components.
- Consists of valves, controls and hydraulic lines.
- Enclosed Cab
- Air Conditioning
- Work Lights
- Road Lights
- Rotating Beacon
- Tire Options: Foam-filled, Solid
Standard Carriage
50 in. (1.3 m) or 60 in. (1.5m) or 72 in. (1.8 m)
Side Tilt Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Swing Carriage
72 in. (1.8 m); 90 degrees
Side-Shift Carriage
50 in. (1.3 m)
Dual Fork Positioning Carriage Tower
8 ft (2.4 m), 50 in. (1.3 m) Standard Carriage
Pallet Forks
2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m)
2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m)
Lumber Forks
1.75 x 7 x 60 in. (44 mm x 178 mm x 1.2 m)
2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m)
Cubing Forks
2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
Fork Extensions
90 in. (2.3 m)
Material Bucket
72 in. (1.8 m), 1.0 cu yd (0.76 m3)
96 in. (2.4 m), 1.5 cu yd (1.15 m3)
102 in. (2.6 m, )2.0 cu yd (1.53 m3)
Grapple Bucket
96 in. (2.4 m), 1.75 cu yd (1.34 m3)
Truss Boom
12 ft (3.7 m), 2,000 lb (907 kg) capacity
15 ft (4.6 m), 2,000 lb (907 kg) capacity
12 ft (3.7 m) with winch, 2,000 lb (907 kg) capacity
Fork Mounted Work Platform
8 ft (2.4 m), 1,000 lb (455 kg) capacity
Lifting Hook
Interested in buying the JLG 644E42? Contact MJ Equipment today!