JLG G10-55A Features And Specs
JLG G10-55A Features
The JLG G10-55A telehandler combines high performance with compact size for job sites demanding power and agility. With a max lift capacity of 5,500 lb and a reach just under 11 ft, it fits tight spaces without sacrificing load control. Powered by a 74 hp Deutz engine and hydrostatic transmission, the G5-18A delivers steady travel speeds, smooth telescoping action and quick response for fast-paced tasks.
JLG G10-55A Specs
| Rated Capacity At 24 in. (610 mm) load center | 10,000 lb (4,536 kg) |
| Maximum Lift Height | 55 ft (16.8 m) |
| Frame Leveling | 10 degrees |
| Lift Speed (boom retracted) | Up: 14.6 sec Down: 15.8 sec |
| Boom Speed | Extend: 17.3 sec Retract: 16.8 sec |
| Travel Speed Forward | 20 mph (32 kmph) |
| Drawbar Pull (loaded) | 20,000 lb (9,072 kg) |
| Operating Weight With 48 in. (1.2 m) carriage and forks | 34,400 lb (15,604 kg) |
| Length (less forks) | 243.8 in. (6.2 m) |
| Width | 101 in. (2.56 m) |
| Height | 101 in. (2.56 m) |
| Wheelbase | 144 in. (3.65 m) |
| Ground Clearance | 18 in. (457 mm) |
| Outside Turning Radius | 168 in. (4.27 m) |
| Max. Reach from Front Tires to 24 in. (610 mm) Load Center | 42 ft (12.8 m) |
STANDARD EQUIPMENT, OPTIONS & ATTACHMENTS FOR THE JLG G10-55A
Engine
- Make and Model Perkins 1104D
- Turbocharged and Aftercooled
- Fuel No. 2 Diesel
- Cycles 4
- No. of Cylinders 4
- Displacement 276 cu in (4.5 L)
- Rated Speed 2,400 rpm
- Max. Gross BHP 125 hp (93 kW)
- Fuel Tank 38 gal (144 L)
Engine Filters
- Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector and replaceable dry filter element.
- Visual service indicator.
- Replaceable element-type fuel filter.
- Full-flow replaceable-element engine oil filter.
Electrical System
- Voltage — 12V
- Alternator — 65 amp
- Battery — 1050 Cold Cranking amps at 0°F
Transmission
- Powershift with torque converter
- 4 speeds forward, 3 reverse.
- Neutral start switch (Park brake must be engaged to start).
- Full time 4-wheel drive.
- Directional and gear change control on single steering mounted lever.
- Enclosed Cab
- Air Conditioning
- Auxiliary Electrics
- AccuPlace™ with Ride Control
- Work Lights
- Road Lights
- Rotating Beacon
- Pintle Hook
- Fenders
- Brick Guard
- Tires
- Foam-filled
- Rock
- Solid
- 17.5 x 25
Standard Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Side-Tilt Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Swing Carriage
72 in. (1.8 m); 90 or 180 degrees
Sheet Material Adapter Tower
8 ft (2.4 m); 50 in. (1.3 m) Standard or Side-tilt Carriage*
Pallet Forks
2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m)
2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m)
Lumber Forks
1.75 x 7 x 60 in. (44 mm x 178 mm x 1.5 m)
2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m)
Cubing Forks
2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
Material Bucket
72 in. (1.8 m), 1.0 cu yd (0.76 m3)
96 in. (2.4 m), 1.5 cu yd (1.15 m3)
102 in. (2.6 m), 2.0 cu yd (1.53 m3)
Grapple Bucket
96 in. (2.4 m), 1.75 cu yd (1.34 m3)
Truss Boom
12 ft (3.7 m), 2,000 lb (907 kg) capacity
15 ft (4.6 m), 2,000 lb (907 kg) capacity
12 ft (3.7 m) with winch, 2,000 lb (907 kg) capacity
Fork Mounted Work Platform
8 ft (2.4 m), 1,000 lb (455 kg) capacity
Lifting Hook
Interested in buying the JLG G10-55A? Contact MJ Equipment today!