JLG TF6-42 Features And Specs
JLG TF6-42 Features
The JLG TF6-42 telehandler combines high performance with durability for job sites demanding power and agility.
JLG TF6-42 Specs
| Rated Capacity At 24 in. (610 mm) load center | 6,600 lb (2,994 kg) |
| Maximum Lift Height | 42 ft (12.8 m) |
| Frame Leveling | 10 degrees |
| Lift Speed (boom retracted) | Up: 14 sec Down: 10 sec |
| Boom Speed | Extend: 20 sec Retract: 8 sec |
| Travel Speed Forward | 19.5 mph (31.4 kmph) |
| Drawbar Pull (loaded) | 18,000 lb (8,165 kg) |
| Operating Weight With 50 in. Carriage and Forks | 20,300 lb (9,208 kg) |
| Length (less forks) | 212.6 in. (5.40 m) |
| Width | 95.5 in. (2.41 m) |
| Height | 94 in. (2.38 m) |
| Wheelbase | 128 in. (3.25 m) |
| Ground Clearance | 16.4 in. (416 mm) |
| Outside Turning Radius | 144 in. (3.65 m) |
| Max. Reach from Front Tires to 24 in. (609 mm) Load Center | 29 ft (8.83 m) |
STANDARD EQUIPMENT, OPTIONS & ATTACHMENTS FOR THE JLG TF6-42
Engine
- Make and Model Cummins QSB3.3T
- Fuel No. 2 Diesel
- Cycles 4
- No. of Cylinders 4
- Displacement 202 cu in (3.3 L)
- Rated Speed 2,400 rpm
- Max. Gross BHP 99 hp (74 kW)
- Fuel Tank 38 gal (141 L)
Engine Filters
- Two-stage dry air cleaner—centrifugal pre-cleaner with continuous dust ejector andreplaceable dry filter element.
- Visual service indicator.
- Replaceable element-type fuel filter/water separator. Full-flow replaceable-element engine oil filter.
Electrical System
- Voltage: 12V
- Alternator: 63 amp
- Battery: 810 cold cranking amps at 0°F
Transmission
- Powershift with torque converter.
- 4-speed forward and 3-speed reverse.
- Neutral start switch (park brake must also be engaged to start).
- Full time 4-wheel drive.
- Directional and gear change control on single steering column mounted lever.
Axles
- Trunnion mounted planetary 55° steer axles.
- Integral steer cylinder.
- High bias limited slip differential on front axle.
Service Brakes
- Inboard wet disc brakes on front axle.
Parking Brakes
- Wet disc spring-applied hydraulic release.
- Light on dash indicates when brake is on.
Tires
- Standard: 370/75-28
Cab
- Certified ROPS/FOPS structure, adjustable seat and horn.
- Forward, neutral, reverse lever on left of steering column.
Steering 4-Wheel
- Power steering with manual backup.
- Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.
Instruments
- Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge.
- All gauges protected by clear acrylic cover.
Controls
- Grouped for operator comfort and convenience.
- Boom lift and telescope on single joystick.
- Right-hand tilt and sway lever.
- Foot throttle.
Hydraulic System-Implement
- Single-section gear pump.
- 40 gal (151.4 L) system capacity.
- 8 micron filter with visual service indicator and suction strainer.
- Lift, crowd, tilt, telescope and sway cylinders have holding valves intended to prevent dropping of load in the event of hose failure.
- Auxillary Hydraulics
- Enclosed Cab
- Air Conditioning
- Auxiliary Electrics
- Arctic Package
- Work Lights
- Road Lights
- Rotating Beacon
- Pintle Hook
- Brick Guard
- Fenders
- Tires
- Foam-Filled
- Solid
Standard Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Side-Tilt Carriage
50 in. (1.3 m) or 60 in. (1.5 m) or 72 in. (1.8 m)
Swing Carriage
72 in. (1.8 m); 90 degrees
Dual Fork Positioning Carriage
Sheet Material Adapter Tower
8 ft (2.4 m); 50 in. (1.3 m) Standard or Side-tilt Carriage*
Pallet Forks
2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
2.36 x 5 x 48 in. (60 mm x 127 mm x 1.2 m)
2.00 x 6 x 72 in. (51 mm x 152 mm x 1.8 m)
Lumber Forks
1.75 x 7 x 60 in. (44 mm x 178 mm x 1.5 m)
2.36 x 6 x 60 in. (60 mm x 152 mm x 1.5 m)
Cubing Forks
2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
Material Bucket
72 in. (1.8 m), 1.0 cu yd (0.76 m3)
96 in. (2.4 m), 1.5 cu yd (1.15 m3)
102 in. (2.6 m), 2.0 cu yd (1.53 m3)
Grapple Bucket
96 in. (2.4 m), 1.75 cu yd (1.34 cu m)
Truss Boom
12 ft (3.7 m), 2,000 lb (907 kg) capacity
15 ft (4.6 m), 2,000 lb (907 kg) capacity
12 ft (3.7 m) with winch,
2,000 lb (907 kg) capacity
Fork Mounted Work Platform
8 ft (2.4 m), 1,000 lb (455 kg) capacity
Lifting Hook
Interested in buying the JLG TF6-42? Contact MJ Equipment today!