Construction Equipment Supplier

SkyTrak Models

Search Parts

Length (less forks):

 

 

238.8 in. (6.06 m)

SkyTrak Model 10054L

 

10054L Chart

Width: 102 in. (2.59 m)
Height: 101.1in. (2.56 m)
Wheelbase: 119.5 in. (3.03 m)
Ground Clearance: 18 in. (457 mm)
Outside Turning Radius: 164 in. (4.16 m)
Max. Reach from Front Tires to 24 in. (609 mm) Load Center: 39 ft (11.27 m)
Rated Capacity: 10,000 lb (4,536 kg)
Maximum Lift Height: 53 ft 2 in. (16.2 m)
Frame Leveling: 10˚
Lift Speed (boom retracted): Up: 15 sec, Down: 11.5 sec
Boom Speed: Extend: 15.7 sec, Retract: 15.5 sec
Travel Speed Forward: 4-Speed: 20 mph (32 kmph)
Drawbar Pull: 29,570 lb (13,413 kg)
Operating Weight Without Carriage and Forks: 27,323 lb (12,394 kg)
Engine: Make and Model Cummins QSB 4.5T Turbo
Fuel: Diesel
Cycles: 4
No. of Cylinders: 4
Displacement: 274 cu in (4.5 L)
Torque Rating: 305 lb ft (414 Nm) @ 1,500 rpm
Rated Speed: 2,500 rpm
Max. Gross BHP: 110 hp (82 kW)
Fuel Tank: 35 gal (132 L)
Engine Filters: Two-stage dry air cleaner — centrifugal precleaner with continuous dust ejector and replaceable dry filter element. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
Voltage: 12V
Alternator: 95 amp
Battery: Two batteries, each with 850 cold cranking amps at 0°F
Transmission: Modulated powershift. 4-speed forward and 3-speed reverse
Axles: Full-time planetary 4-wheel drive.  Oscillating rear axle with Stabil-TRAK™ System.
Service Brakes: Hydraulically actuated inboard wet disc brakes.
Parking Brakes: Emergency brake with transmission declutch feature.
Tires: Standard: Air-filled 17.5 x 25 — 12 ply, Optional: 17.5 x 25 Radial; 17.5 x 25 Bias Ply Foam-Filled
Cab: Certified ROPS/FOPS structure. Deluxe suspension seat with retractable seat belt. Rear view mirrors.
Steering: 4-Wheel Power steering. Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.
Instruments: Instrument cluster with gauges and warning lights.
Controls: Dual joystick controls. Proportional frame tilt, fork tilt and auxiliary hydraulics.
Hydraulic System:
  • Implement Piston pump.
  • 60 gal (225 L) system capacity.
  • Variable flow, load sensitive hydraulic system.
  • Load holding valves on frame level, stabilizer, attachment tilt, extend and lift cylinders.
Front Outriggers: Axle mounted high clearance outriggers allow frame leveling without changing stance.
Auxiliary Hydraulics: Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls and hydraulic lines.
Accessories & Options:
  • Enclosed All Weather Cab
  • Basic Work Lights
  • Complete Road Lights
  • Rotating Beacon
  • Fenders
Attachments:
  • Standard Carriage – 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
  • ± 10° Side Tilt Carriage – 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
  • ± 45° Swing Carriage – 52 in. (1.3 m) or 72 in. (1.8 m)
  • Pallet Forks – 2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
  • Lumber Forks – 1.75 x 7 x 60 in. (45 mm x 178 mm x 1.5 m)
  • Block Forks – 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
  • Wallboard/Sheet Material Handler
  • Utility Bucket – 1.25 cu yd (0.95 m3)
  • Concrete Bucket – 0.5 cu yd (0.38 m3) or 1.00 cu yd (0.76 m3)
  • Truss Boom – 15 ft (4.6 m)
  • Truss Boom with Winch – 3 ft (91 cm)
  • Hydraulic Earth Auger
  • TRAK-Attach System