USA877-355-5438
INT920-668-8484
SKYTRAK 10054L FEATURES AND SPECS
SkyTrak 10054L Features
The SkyTrak 10054L is equipped with a 110 hp Cummins turbo diesel engine, a 4-speed powershift transmission and Stabil-TRAK™ rear axle stabilization. It features a certified ROPS/FOPS cab, dual joystick controls and 4-wheel selectable steering modes. A full gauge cluster, deluxe seat and reinforced electrical system round out the 10054L’s operator-friendly design.
SkyTrak 10054L Benefits
With a lift height of 53′1″ (16.2 m) and a rated capacity of 10,000 lbs (4,536 kg), the 10054L delivers strong reach and power for heavy lifts. Its 39 ft (11.27 m) forward reach, 18 in. (457 mm) ground clearance and 20 mph (32 km/h) top speed support productivity in demanding environments. The load-sensing hydraulic system adds smooth, responsive control.
SkyTrak 10054L Specs
| Length (Less Forks) | 238.8 in. (6.06 m) |
| Width | 102 in. (2.59 m) |
| Height | 101.1 in. (2.57 m) |
| Wheelbase | 119.5 in. (3.03 m) |
| Ground Clearance | 18 in. (457 mm) |
| Outside Turning Radius | 164 in. (4.16 m) |
| Max Reach from Front Tires to 24″ Load Center | 39 ft (11.27 m) |
| Rated Capacity | 10,000 lbs (4536 kg) |
| Max Lift Height | 53 ft 1 in. (16.2 m) |
| Frame Leveling | ±10° |
| Lift Speed (Boom Retracted) | 15 sec (Up), 11.5 sec (Down) |
| Boom Speed | 15.5 sec (Extend), 15.5 sec (Retract) |
| Travel Speed (Forward) | 20 mph (32 km/h) |
| Drawbar Pull | 29,570 lbs (13,413 kg) |
| Operating Weight (Without Carriage & Forks) | 27,323 lbs (12,394 kg) |
| Engine | Cummins QSB4.5T Turbo Diesel, 110 HP (82 kW) @ 2500 RPM, 274 cu in (4.5 L), 4-cylinder, torque 305 lb-ft (414 Nm) @ 1500 RPM |
| Fuel | Diesel |
| Fuel Tank Capacity | 35 gal (132 L) |
| Engine Filters | Two-stage dry air cleaner with centrifugal pre-cleaner, continuous dust ejector, replaceable dry filter, spin-on fuel filter and full-flow spin-on engine oil filter |
| Electrical System | 12V, alternator 95 amp, two batteries with 850 cold cranking amps @ 0°F |
| Transmission | Powershift, 4-speed forward, 3-speed reverse |
| Axles | Full-time planetary 4-wheel drive, oscillating rear axle with Stabil-TRAK™ system |
| Service Brakes | Hydraulically actuated inboard wet disc brakes |
| Parking Brakes | Transmission declutch with emergency brake feature |
| Tires | Air-filled 17.5 × 25, 12-ply (Standard), 17.5 × 25 radial, 17.5 × 25 bias-ply foam-filled (Options) |
| Cab | Certified ROPS/FOPS structure with deluxe suspension seat, retractable seat belt, rear-view mirrors and lockable covers |
| Steering | 4-wheel power steering with operator-selectable 4-wheel circle, 4-wheel crab, 2-wheel front |
| Instruments | Gauge cluster with warning lights |
| Controls | Dual joystick controls for proportional frame tilt, fork tilt and auxiliary hydraulics |
| Hydraulic Oil Capacity | 60 gal (227 L) |
| Hydraulic System | Variable flow, load-sensitive operation |
STANDARD EQUIPMENT, OPTIONS & ATTACHMENTS FOR THE SKYTRAK 10054L
- Enclosed All-Weather Cab
- Basic Work Lights
- Complete Road Lights
- Rotating Beacon
- Fenders
- Standard Carriage: 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
- ±10° Side Tilt Carriage: 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
- ±45° Swing Carriage: 52 in. (1.3 m) or 72 in. (1.8 m)
- Pallet Forks: 2.36 x 4 x 48 in. (60 mm x 102 mm x 1.2 m)
- Lumber Forks: 1.75 x 7 x 60 in. (45 mm x 178 mm x 1.5 m)
- Block Forks: 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
- Wallboard/Sheet Material Handler
- Utility Bucket: 1.25 cu yd (0.95 m3)
- Concrete Bucket: 0.5 cu yd (0.38 m3) or 1.00 cu yd (0.76 m3)
- Truss Boom: 15 ft (4.6 m)
- Truss Boom with Winch: 3 ft (91 cm)
- Hydraulic Earth Auger
- TRAK-Attach System
Interested in Buying the SkyTrak 10054L? Contact MJ Equipment today!