



SkyTrak Model 5030 Specs
SKYTRAK 5030 FEATURES AND SPECS
SkyTrak 5030 Features
The SkyTrak 5030 features a 70 hp Ford diesel engine and a 4-speed transmission with a foot-operated shuttle pedal. A front axle stabilizer provides added control over uneven terrain, while the hydrostatically steered rear axle and oil-cooled disc brakes boost handling and safety. Standard features include FOPS protection, a backup alarm and multiple fork options.
SkyTrak 5030 Benefits
With a 30′6″ (9.3 m) lift height and automatic front-wheel assist below 5 mph (8 km/h), the SkyTrak 5030 performs reliably in tight, rugged conditions. Operators benefit from smooth travel up to 18.8 mph (30.3 km/h), a 17′ (5.18 m) turning radius and a built-in differential lock for added traction on unstable ground.
SkyTrak 5030 Specs
Engine | Ford 4-cycle diesel, 70 hp (4195 cc / 268 CID) |
Torque Converter | 11″ (279 mm) single-stage, foot-operated shuttle pedal |
Transmission | 4-speed forward, 4-speed reverse via converter output |
Axles & Brakes | Hydrostatically steered rear axle with ±10° oscillation. 8″ (203 mm) oil-cooled disc brakes, individually operated or locked together. Emergency brake lever automatically disengages when released |
Lifting System Hydraulics | Front-mounted gear-type pump, 37 gpm (140 l/min) @ 2,200 rpm. |
Front Wheel Assist | Piston-type, pressure-compensating pump, 17 gpm (64 l/min) @ 2,200 rpm. Front wheel hydraulic motors engage automatically below 5 mph (8 km/h) |
Electrical System | 12-volt, negative ground with starting motor, alternator and two batteries |
Max Travel Speed @ 2,100 rpm | 18.8 mph forward (30.3 km/h), 18.6 mph in reverse (29.9 km/h) |
Differential Lock | Locks rear drive wheels for positive traction in mud, ice or loose ground. Automatically disengages when no longer needed |
Front Axle Stabilizer | Cushions front wheel shocks over rough terrain when the boom is retracted. Automatically locks when the boom extends, preventing axle pivot and providing a four-point stance |
Max Lift Height | 30′ 6″ (9.3 m) |
Length Less Forks | 16′ 5″ (5.00 m) |
Width | 95.375″ (2.42 m) |
Wheelbase | 96″ (2.44 m) |
Ground Clearance | 13″ (330 mm) |
Turning Clearance Radius | 17′ (5.18 m) |
Fork Length (Flat) | 36″ (914 mm) |
Block Forks | 48″ (1219 mm) |
Height (Boom Lowered) | 9′ 6″ (2.90 m) |
Operating Weight | 17,600 lbs. (7983 kg) |
Fuel Tank Capacity | 20 gal. (76 liters) |
Hydraulic Reservoir Capacity | 32 gal. (121 liters) |
Standard Tires | 15 x 19.5, 12-ply tubeless (Front), 16.9 x 24, 8-ply all-traction utility tube-type (Rear). |
STANDARD EQUIPMENT, OPTIONS & ATTACHMENTS FOR THE SKYTRAK 5030
- Ammeter
- Indicators for engine oil pressure, engine temperature and hydraulic oil temperature
- FOPS
- Horn
- Back-up alarm
- Brake lights
- Seat belts
- Parking brake
- Forks – 36”(914 mm), set of two, 5,000 lb. (2,268 kg) @18” (457 mm) centers and 48” (1219 mm), set of two, 5,000 lb. (2,268 kg) @24” (610 mm) centers
- Rear Wheel Weights (in place of hydrofill)
- Standard Carriage – 48 in. (1219 mm), 60 in. (1524 mm) or 72 in. (1829 mm)
- Block Forks – 48 in. (1219 mm), set of four, 4,000 lb (1814 kg) @ 24” (610 mm) centers and 48 in. (1219 mm), set of six, 6,000 lb (2722 kg) @ 24” (610 mm) centers
- Concrete Hopper – 3/4 cu. yd. (.57 m3)
- Rubbish Bucket – 1 cu. yd. (.77 m3)
- Crane Hook
- Light Package
- Vandalism Kit
- Mast Extension – 10 ft. (3.1)
- Special Paint (single color)
- Fenders – Front (set of two); Rear (set of two)
- Side Tilt Carriage – 48 in. (1219 mm), 60 in. (1524 mm) or 72 in. (1829 mm)
- Cold Start Kit
- Safety Check Valves (for Lift and Tilt Cylinders)
Interested in Buying the SkyTrak 5030? Contact MJ Equipment today!