Construction Equipment Supplier

SkyTrak Models

Search Parts

Length (less forks):

 

 

232 in. (5.89 m)

SkyTrak Model 6042

 

6042L Chart

Width: 98 in. (2.48 m)
Height: 102 in. (2.59 m)
Wheelbase: 113 in. (2.87 m)
Ground Clearance: 16 in. (406 mm)
Outside Turning Radius: 168 in. (4.26 m)
Max. Reach from Front Tires to 24 in. (609 mm) Load Center: 27.9 ft (8.50 m)
Rated Capacity: 6,000 lb (2,722 kg)
Maximum Lift Height: 41 ft 11 in. (12.7 m)
Frame Leveling: 10˚
Lift Speed (boom retracted): Up: 17.5 sec, Down: 11 sec
Boom Speed: Extend: 19 sec, Retract: 19 sec
Travel Speed Forward: 4-Speed Forward: 20 mph (32 kmph)
Drawbar Pull: 23,580 lb (10,695 kg)
Operating Weight Without Carriage and Forks: 23,520 lb (10,669 kg)
Engine: Cummins 4BT3.9 Turbo
Fuel: Diesel
Cycles: 4
No. of Cylinders: 4
Displacement: 239 cu in (3.9 L)
Torque Rating: 305 lb ft (414 Nm) @ 1,500 rpm
Rated Speed: 2,500 rpm
Max. Gross BHP: 99 hp (74 kW)
Fuel Tank: 35 gal (132 L)
Engine Filters: Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector and replaceable dry filter element. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
Electrical System: Voltage: 12V, Alternator: 65 amp, Battery: 850 cold cranking amps at 0°F
Transmission: Modulated powershift. 4-speed forward and 3-speed reverse.
Axles: Full-time planetary 4-wheel drive. Oscillating rear axle with Stabil-TRAK™ System.
Service Brakes: Hydraulically actuated inboard wet disc brakes.
Parking Brakes: Emergency brake with transmission declutch feature.
Tires: Standard: Air-filled 13.00 x 24 — 12 ply, Optional: 13.00 x 24 foam-filled; 13.00 x 24 rock tires
Cab: Certified ROPS/FOPS structure. Deluxe suspension seat with retractable seat belt. Rear view mirrors. Lockable covers.
Steering: 4-Wheel Power steering. Operator selectable 4-wheel circle, 4-wheel crab, 2-wheel front.
Instruments: Instrument cluster with gauges and warning lights.
Controls: Dual joystick controls. Proportional frame tilt, fork tilt and auxiliary hydraulics.
Hydraulic System:
  • Implement Piston pump.
  • 60 gal (225 L) system capacity.
  • Variable flow, load sensitive hydraulic system.
  • Load holding valves on frame level, stabilizer, attachment tilt, extend and lift cylinders.
Auxiliary Hydraulics: Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines.
Accessories & Options:
  • Enclosed All Weather Cab
  • Basic Work Lights
  • Complete Road Lights
  • Rotating Beacon
  • Fenders
Attachments:
  • Standard Carriage – 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
  • ± 10° Side Tilt Carriage – 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
  • ±45° Swing Carriage – 72 in. (1.8 m)
  • Pallet Forks – 2 x 4 x 48 in. (51 mm x 102 mm x 1.2 m)
  • Lumber Forks – 1.75 x 7 x 60 in. (45 mm x 178 mm x 1.5 m)
  • Block Forks – 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
  • Wallboard/Sheet Material Handler
  • Utility Bucket – 1.25 cu yd (0.95 m3)
  • Concrete Bucket – 0.5 cu yd (0.38 m3)
  • Truss Boom – 12 ft (3.7 m)
  • Truss Boom with Winch – 3 ft (91 cm)
  • Hydraulic Earth Auger