USA877-355-5438
INT920-668-8484
SKYTRAK 8042L FEATURES AND SPECS
SkyTrak 8042L Features
The SkyTrak 8042L features a 110 hp Cummins turbo diesel engine, 4-speed powershift transmission and full-time 4WD with Stabil-TRAK™ for enhanced stability on rough terrain. Inside the ROPS/FOPS-certified cab, operators get a deluxe suspension seat, dual joystick controls and a full instrument cluster. Frame leveling, load-sensing hydraulics and selectable steering modes round out its feature set.
SkyTrak 8042L Benefits
With an 8,000 lb (3,629 kg) lift capacity and a 41′11″ (12.8 m) max lift height, the 8042L handles high-reach tasks with confidence. A tight 156 in. (3.96 m) turning radius, 26.6 ft (8.10 m) forward reach and 17.3 in. (439 mm) ground clearance provide excellent maneuverability and performance on dynamic job sites.
SkyTrak 8042L Specs
| Length (Less Forks) | 225.2 in. (5.72 m) |
| Width | 98.2 in. (2.49 m) |
| Height | 99.4 in. (2.52 m) |
| Wheelbase | 119.5 in. (3.04 m) |
| Ground Clearance | 17.3 in. (439 mm) |
| Outside Turning Radius | 156 in. (3.96 m) |
| Max Reach from Front Tires to 24″ Load Center | 26.6 ft (8.10 m) |
| Rated Capacity | 8,000 lbs (3629 kg) |
| Max Lift Height | 41 ft 11 in. (12.8 m) |
| Frame Leveling | ±10° |
| Lift Speed (Boom Retracted) | 15 sec (Up), 12.5 sec (Down) |
| Boom Speed | 14.5 sec (Extend), 14 sec (Retract) |
| Travel Speed (Forward) | 4-speed, 20 mph (32 km/h) |
| Drawbar Pull | 24,000 lbs (10,886 kg) |
| Operating Weight (Without Carriage & Forks) | 25,365 lbs (11,505 kg) |
| Engine | Cummins QSB4.5T Turbo Diesel, 110 HP (82 kW) @ 2500 RPM, 274 cu in (4.5 L), 4-cylinder, torque 305 lb-ft (414 Nm) @ 1500 RPM |
| Fuel | Diesel |
| Fuel Tank Capacity | 35 gal (132 L) |
| Engine Filters | Two-stage air cleaner with centrifugal pre-cleaner, continuous dust ejector, replaceable dry filter, spin-on fuel filter and full-flow spin-on engine oil filter |
| Electrical System | 12V, alternator 65 amp, two batteries with 850 cold cranking amps @ 0°F |
| Transmission | Powershift, 4-speed forward, 3-speed reverse |
| Axles | Full-time planetary 4-wheel drive, oscillating rear axle with Stabil-TRAK™ system |
| Service Brakes | Hydraulically actuated inboard wet disc brakes |
| Parking Brakes | Transmission declutch with emergency brake feature |
| Tires | Air-filled 13.00 × 24, 12-ply (Standard), Foam-filled 13.00 × 24, Rock foam 13.00 × 24, 15.5 × 25 radial, 15.5 × 25 bias air (Options) |
| Cab | Certified ROPS/FOPS structure with deluxe suspension seat, retractable seat belt, rear-view mirrors and lockable covers |
| Steering | 4-wheel power steering with operator-selectable 4-wheel circle, 4-wheel crab, 2-wheel front |
| Instruments | Gauge cluster with warning lights |
| Controls | Dual joystick controls for proportional frame tilt, fork tilt and auxiliary hydraulics |
| Hydraulic Oil Capacity | 60 gal (227 L) |
| Hydraulic System | Variable flow, load-sensitive system |
STANDARD EQUIPMENT, OPTIONS & ATTACHMENTS FOR THE SKYTRAK 8042L
- Enclosed All-Weather Cab
- Basic Work Lights
- Complete Road Lights
- Rotating Beacon
- Fenders
- Standard Carriage: 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
- ±10° Side Tilt Carriage: 48 in. (1.2 m), 60 in. (1.5 m) or 72 in. (1.8 m)
- ±45° Swing Carriage: 52 in. (1.3 m) or 72 in. (1.8 m)
- Pallet Forks: 2 x 4 x 48 in. (51 mm x 102 mm x 1.2 m)
- Lumber Forks: 1.75 x 7 x 60 in. (45 mm x 178 mm x 1.5 m)
- Block Forks: 2 x 2 x 48 in. (51 mm x 51 mm x 1.2 m)
- Wallboard/Sheet Material Handler
- Utility Bucket: 1.25 cu yd (0.95 m3)
- Concrete Bucket: 0.5 cu yd (0.38 m3)
- Truss Boom: 12 ft (3.7 m)
- Truss Boom with Winch: 3 ft (91 cm)
- Hydraulic Earth Auger
Interested in Buying the SkyTrak 8042L? Contact MJ Equipment today!